Lithium Battery Three-Roll Transfer Coating Machine
For Battery Manufacturing
The MR-SY300-2J Laboratory Transfer Coating Machine is a three-roller transfer coating machine that allows for continuous and intermittent coating and is convenient for applications in surface coating processes on a variety of substrates. Particularly suitable for the lithium-ion battery industry, the machine is designed for the convenience of the researcher, while meeting the requirements for coating accuracy and consistency without any variation from production, and has excellent drying results, making it ideal for R&D and small trials on lithium-ion batteries, supercapacitor, nickel batteries and other secondary batteries.
Features
- Plasma cleaning function optional.
- Can switch freely to achieve continuous and intermittent coating.
- Substrate tension control, transport stability, configuration correction device.
- Hot air oven, the upper and lower double-sided blowing, high-quality drying effect.
- Three-roll transfer coating, wider coating window.
- Comma scraper measurement, with precision adjustment agencies, access to high-precision coating.
- Power generation with analogue signal control, high accuracy ±0.3°C of the heating system and long life.
- PLC control,Touch screen operation, easy to use.
- Optional solvent recovery device
| | Item | Technical parameters |
| | | Lithium iron phosphate, lithium cobalt oxide, lithium manganese oxide system battery positive and negative electrode coating process |
| | Coating method | Continuous coating, intermittent coating |
| | Number of oven sections | 2 sections 1m/section |
| | Mechanical speed | Max. 2m/min |
| | Coating speed | 0~1m/min |
| | Coating gap | Max. 100mm (free setting without limit) |
| | Substrate thickness | Aluminum foil:8～30um
Copper foil:8～30um |
| | Roll surface design width | 330 mm |
| | Ensure coating width | ≤300mm |
| | Coated rollers, rubber rollers | Φ120mm |
| | Squeegee rollers | Φ80mm |
| | Coating accuracy | ±3um |
| | Double-coated film weight accuracy (mg/cm2) | Coated centre value ±1.0% |
| | Slurry viscosity | 2000~12000 mpas |
| | Single-coated dry thickness range | 20-200μm |
| | Solvent characteristics | Oily solvent NMP(s.g=1.033,b.p=204℃)
Watery solvent H2O/NMP(s.g=1.000,b.p=100℃) |
| | Solid content | 20~85% |
| | Coating size accuracy (mm) | L≤±1,W≤±0.5 |
| | Positive and negative alignment accuracy (mm) | L≤±1,W≤±0.5 |
| | Item | Technical parameters |
| | Roller installing structure | Steel frame firmly installed |
| | Roller surface treatment | Metallic aluminum roller surface oxidation |
| | Tension control system | Automatic constant tension control |
| | Correction method | Automatic EPC control, travel 50mm
Roll materials with 3-inch inflatable shaft fixed； |
| | Feed roll materials method | Unwinding with single inflatable shaft |
| | Maximum unwinding diameter | Ф250mm |
| | Maximum bearing capacity of inflatable shaft | 80Kg |
| | Number of unwinding inflatable shaft | 1 pcs |
| | Main drive motor | Servo motor |
| | Scraper structure | Double-sided comma scraper |
| | Coating roller(steel roller) | Surface hard chromium plating |
| | Back roller(glue roller) | Surface package imported EPDM |
| | Scraper intermittent height adjustment | Manual |
| | Single machine head position | Installation and operation in front of oven |
| | Item | Technical parameters |
| | Oven structure | Single layer independent heating, up and down configuration |
| | Oven length | 1m/section, 2 sections in total |
| | Material | SUS304 stainless steel |
| | | Divided into normal working temperature control, over-temperature monitoring alarm protection control, and cut off the heating
main power; all sections are completely independent control |
| | Heating method | Electric heating, hot air circulation structure |
| | Single oven heating power | 6KW |
| | Oven internal temperature | Design Max150℃,Single section oven internal temperature difference≤2.5℃ |
| | | Upper and down blowing,upper and down wind chamber shared heating body |
| | Tuyere structure | The tuyere groove using a special mold slotted |
| | Fan control | Contactor control |
| | Heating | Solid-state relay |
| | Item | Technical parameters |
| | Scraper | Round beating≤±1.5um,Ra0.4, straightness≤±1.5um |
| | Coating roller(steel roller) | Round beating≤±1 .5um,Ra0.4 straightness≤±1.5um |
| | Glue roller | Round beating≤10um,straightness≤10um |
| | Correction error | ±0.2mm |
Installation environment requirements
- Machine head ambient temperature 25~30℃,others 10~40℃.
- Machine head relative humidity: positive RH ≤35%, negative RH ≤98%,others ≤98%.
- Power supply:3PH 380V,50HZ, Voltage fluctuation range:+8%～–8%；start total power 15KW.
- Compressed air:After drying, filtration and stabilivolt: outlet pressure＞ 5.0kg/cm2.
Picture Display
Battery Assembly Line Battery Making Machine
Coin Cell Machines
Pouch Cell Assembly
Cylindrical Cell Machines
Factory Show
Shenzhen Meirui Zhida Technology Co., Ltd. is a Manufacturer specializing in a Complete Set of Lithium Ion Battery Research Equipment. MRBEST has been committed to providing customers with comprehensive Battery Research and Development Equipment to meet customers' new Lithium Battery Technology and New Needs in recent years, such as Sodium Batteries, Solid-state Battery and Semi-solid-state Battery Equipment, special process requirements such as dry process, 4680 large cylindrical battery equipment requirements etc. Create One-Stop Service for Battery Research Equipment for customers and provide Professional Technical Guidance and Support.
MRBEST related products include: Vacuum Mixers, Planetary Vacuum Mixers, Lab Transfer Coating Machine, Automatic Film Coating Machine, Electric Vertical Roller Machine, Pneumatic Die-cutting Machines, Electric Sealing Machines, Vacuum Pre-sealing machine, Secondary Sacuum Sealing Machine, Coin Cell battery Sealing Machine, Battery Winding Machine, Pouch Cell Sealing Machine, Ultrasonic Spot Welding Machine, Glove Box with Purification System etc. MRBEST products have been sold at home and abroad. Our main customer include: Universities, Research Institutes, Battery Positive and Negative Material Companies, Battery Cell Manufacturers, and New Energy EV Battery Manufacturers etc.
Product Tags:
|
|
Laboratory Pouch Cell Assembly Lithium Battery Three Roll Transfer Coating Machine Images
|
